Release 1.0.8
http://synercon.wpengine.com/files/SetupSSS2Interface-1.0.8.exe
October 2, 2017
Enabled digital signing for the executable so Windows can trust the installation.
Added Caterpillar ADEM 3 MBL settings file.
This release did not have any issues with virus checkers. See the result at VirusTotalResults-1.0.8.pdf
Release 1.0.7
http://synercon.wpengine.com/files/SetupSSS2Interface-1.0.7.exe
September 4, 2017
This release fixed a permission issue with a settings file that prevented the Serial connection to open. It is recommended that all users upgrade to this version.
DDEC 10 settings files were added after being tested with an ECU.
This release did not have any issues with virus checkers. See the result at VirusTotalResults-1.0.7.pdf.
Release 1.0.6
http://synercon.wpengine.com/files/SetupSSS2Interface-1.0.6.exe
August 23, 2017
This release featured updates to the settings files for CAT, DDEC10/13, and the CM2350. The code as also checked with VirusTotal and proven to be virus free. See the results at VirusTotalResult.pdf
Release 1.0.5
http://synercon.wpengine.com/files/SetupSSS2Interface-1.0.5.exe
August 16, 2017
This release had no change in functionality, but removed an internal block of code that mistakenly was identified as ransomware. Upgrade to this version if your anti-virus software has issues with version 1.0.4.
Added a menu item under the Tools menu to show the current version information.
Release 1.0.4
http://synercon.wpengine.com/files/SetupSSS2Interface-1.0.4.exe
August 15, 2017
This release is a recommended upgrade.
Improves the detection of the Serial connection between the SSS2 and the Interface Application.
Settings tabs are disabled if the SSS2 is not present.
Updated or restored all the SSS2 settings files.
Caterpillar ADEM2.SSS2
Caterpillar ADEM3 BSX.SSS2
Caterpillar ADEM3 CKM.SSS2
Caterpillar ADEM4 SDP (2 Wire Coolant sensor).SSS2
Caterpillar ADEM4 SDP (4 Wire Coolant sensor).SSS2
Cummins CM870.SSS2
Cummins CM2350 Vehicle Connector Only.SSS2
DDEC 4.SSS2
DDEC 6.SSS2
DDEC 13 CPC4 Example.SSS2
DDEC 13 CPC4 for 500k J1939 with TCM.SSS2
DDEC 13 CPC4 from 2014 DD15.SSS2
DDEC 13 CPC4 from 2016 DD15 with a TCM.SSS2
defaults.SSS2
MBE VCU only.SSS2
MBE.SSS2
VIN Broadcast Example.SSS2
Release 1.0.3
http://synercon.wpengine.com/files/SetupSSS2Interface-1.0.3.exe
August 13, 2017
This is an update that improves the serial connections and general usability.
Fixes issues with hash calculations so files can be opened.
Release 1.0.2
http://synercon.wpengine.com/files/SetupSSS2Interface-1.0.2.exe
July 22, 2017
Release 1.0.1
June 12, 2017
Release 1.o
June 9, 2017
This release is the first production release for revision 5 hardware. It includes 6 PWM channels and 4 Analog in channels.
Initial Release 0.9b
May 2017
This release was for initial beta testers with Revision 3 hardware.